You will never meet the 108 Mbps wireless router, most have to say that, but to get closer, you're done, buy a wireless adapter for it.
Installing the wireless network adapter
1. Stick your card in the slot on the laptop PCIMICA. Windows XP automatically recognizes the card and ask for the driver. If you have installed the driver, then I recommend you do not find the driver manually by using the manufacturer's qualifiedTo install the driver software.
When you install on your hard disk installed, you must use a number of other crap that you do not need. You install wireless scanning and wireless monitor software, the system will be your only Bogg.
2. You have installed the driver should be able to scan wireless networks. In the bottom right task bar, you see a computer icon with the radio waves coming from it.
It is overMicrosoft Wireless Zero Configuration Utility. This feature is good and bad, is because you try to connect to any wireless network in the area and once you are connected to the network, which, when it becomes available will always try to connect to connect to.
This is bad because if the router to connect to a network called "Linksys" network connection is not secure, since this is the default SSID of the Linksys wireless alll.
The connection to wireless networks candangerous because it could be a hacker Rogue Access Point I have to collect information about you.
3. I suppose you know which network you connect properties to let go, the properties of wireless network card with a double-click the wireless icon in the taskbar and click.
Click the Wireless Networks tab and click Add. Enter your SSID you want. If this is your home wireless network and make sure you change the SSIDbit 'dark and change wireless channel to something other than channel 6
Then you must choose an integrated power supply, the same type of encryption or router of your choice for your wireless. I hope you have WPA2-PSK TKIP or AES chosen.
You may need to upgrade to Microsoft WPA2 support for the installation of Windows XP, click here
You'll know when you install the update because you have not given the option WPA2.
Now typeKey, click OK and you should be able to connect to the network.
Advance Options
Return to your wireless card properties and can look at some options before you. Options vary in name but not in general work.
1. They should be adjusted in the General tab of the wireless adpater properties and click the Configure button next to the name of the WLAN.
2. you can click the Advanced tab (Please note some of these or settingIt is empty notebook battery much faster, but it will improve performance.
3. First you change the channel 11 or the same wireless network. The default channel for most wireless networks is 6
4. You can easily MAC address if you want
5. If you can reduce performance. This will mainly be made for safety reasons at positions maks client, so that hackers do not attack.
6. Do you have a sort of sleep mode, orperformance standards, both to save battery life or focus on performance
7. Roaming options to maximize bytes or away - you're really in a nearby access point and downloading music then you will want to maximize bandwidth. If you are not an access point nearby, then it must change from a distance.
These are just some of the advanced options for the wireless card. Many people do not even know are there.
No comments:
Post a Comment