There are different parts of a network, what can go wrong. You need to ensure that every part of the network is functioning properly, including adapters, cables, connectors, switches, hubs, routers, etc. network hardware is not the only thing you have to be built correctly, can be software problems as well.
Here we talk about some of the hardware aspects of the hub. A hub and a switch, virtually the same function. Switches, hubs replaced, so if you find a goodTroubleshooting a hub is tough, try a search of an Ethernet switch information can be easily installed on a hub.
The network speed will only work as fast as your slowest component if you have a hub 10/100 megabits per second. If you have an older computer with a 10 megabits per second (Mbps) have network cards, consider a 100 Mbps network card upgrade.
The cable also has a role in network speed. The maximum length for an RJ-4510 or 100 Mbit / s is 328 feet. The cable length between two 10/100 Mbps router must be within 15 meters or shorter.
Check how the cables are positioned, if you have long cables. Check the network cable is securely wrapped or tied together. This can lead to electromagnetic fields to stop the transfer of data between two Ethernet ports.
It 'important to properly route the Ethernet cable. Try to avoid the cables near the lamps, sockets and ballasts. Thisstrong electromagnetic interference between the two Ethernet ports, and create.
Make sure that connections to the Ethernet ports Line-Up. Pin 1, 2, 3 and 6, must match, or if you have connection problems. Use a CAT5 cable for best results.
You can no more than two 10/100 Mbps hubs together. To connect the hubs together to ensure that the uplink port. If there is no uplink port, you must have crossed with a network cable.
No comments:
Post a Comment